Home > Products > PU Fire Hose
PU Fire HoseThe PU hose has strong power on acid resistant,wearproof and alkali-resisting. Which could used for raw materials and energy sources transport. Like petroleum ,natural gas ,fire protection,agriculture, garden irrigation and so on .
It is high level hose could afford Mostly market request.
If your market have high quality request of hose. I think this one won't let you down.
Maintenance and operation instructions for hose
1) management.To implement the personnel management, grading, serial number, to certify the use of water quality and in time.To establish and perfect the system of line maintenance, often education personnel consciously abide by.
2) to store.Should be specifically set location or storage room, long-term storage of spare hose should choose warm, ventilated place to store, on the water hose should be single roll stand with the rack, turning twice a year or exchange frilled edge.The accessory hose each other to avoid friction, if necessary, to exchange frilled edge.
3) using aspects.Laying should avoid sudden twists and turns, reverse to avoid after water filling forcibly dragged on the ground, to avoid oil, acid, alkali and other corrosive chemicals contact;In may a flame or strong radiation area, cotton or hemp qualitative hose should be adopted;High water when you stretch belt hook;Through railway through below, should track through the road, the hose should be fitted bridge;To prevent hose and angular contact with hard objects, forcible entry building, do not cast to the hose on the board, steel and other items;Hose should be cleaned after using it;Cold area should be used on the outside of the building stretch lining hose.
4) repair.Find bugs when using, should be timely with package cloth dress, in order to avoid holes expand, and make the mark, use after repair in time.At ordinary times should be regularly check, found damaged, repair in a timely manner.
Working Pressure:FEU-20
Diameter:25-300
Length:15-30(m)
Inner: PU
Technical Data
Model | Inner tube diameter | Length | Working pressure | Burst pressure | |||
inch | mm | m | bar | Mpa | bar | Mpa | |
1 | 1” | 25 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
2 | 1.5” | 40 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
3 | 2” | 50 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
4 | 2.5” | 65 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
5 | 3” | 80 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
6 | 4” | 100 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |
7 | 6” | 150 | 15-30 | 8 | 0.8 | =<20 | =<2.0 |